Chevy C20 - C30 1967-70 Tubular Upper and Lower Control Arm Set,
POL 1967-70 Chevy and GMC truck tubular upper and lower control arm design helps to correct the camber and ball joint angle problems often found when using a drop spindle or lowered coil spring.
Designed an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and true. These arms come with factory early model cross shafts for ease of installation and increased ground clearance.
Works with drop spindles. Corrects geometry for lowered applications. Requires use of aftermarket sway bar.
Kit includes:
2 upper control arms
2 lower control arms
Gloss Black powder coated
1.250" x .188" DOM tubing
4 cross shafts (installed)
2 lower ball joints (If applicable)
2 upper ball joints (If applicable)
Hardware
Sold in sets
Notes:
Due to our improved design, these lower arms now require the use of our after market sway bar. This bar is also dimensionally the same as the Addco type offered by many retailers.
Manufactured in the USA
What does this fit?
1967 1968 1969 1970 Chevy, GMC C20 and C30 truck, Suburban
POL 1967-70 Chevy and GMC truck tubular upper and lower control arm design helps to correct the camber and ball joint angle problems often found when using a drop spindle or lowered coil spring.
Designed an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and true. These arms come with factory early model cross shafts for ease of installation and increased ground clearance.
Works with drop spindles. Corrects geometry for lowered applications. Requires use of aftermarket sway bar.
Kit includes:
2 upper control arms
2 lower control arms
Gloss Black powder coated
1.250" x .188" DOM tubing
4 cross shafts (installed)
2 lower ball joints (If applicable)
2 upper ball joints (If applicable)
Hardware
Sold in sets
Notes:
Due to our improved design, these lower arms now require the use of our after market sway bar. This bar is also dimensionally the same as the Addco type offered by many retailers.
Manufactured in the USA
What does this fit?
1967 1968 1969 1970 Chevy, GMC C20 and C30 truck, Suburban
POL 1967-70 Chevy and GMC truck tubular upper and lower control arm design helps to correct the camber and ball joint angle problems often found when using a drop spindle or lowered coil spring.
Designed an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and true. These arms come with factory early model cross shafts for ease of installation and increased ground clearance.
Works with drop spindles. Corrects geometry for lowered applications. Requires use of aftermarket sway bar.
Kit includes:
2 upper control arms
2 lower control arms
Gloss Black powder coated
1.250" x .188" DOM tubing
4 cross shafts (installed)
2 lower ball joints (If applicable)
2 upper ball joints (If applicable)
Hardware
Sold in sets
Notes:
Due to our improved design, these lower arms now require the use of our after market sway bar. This bar is also dimensionally the same as the Addco type offered by many retailers.
Manufactured in the USA
What does this fit?
1967 1968 1969 1970 Chevy, GMC C20 and C30 truck, Suburban
