POPPY'S CALIPER COAT - RED
Poppy's Caliper Coat is a durable caliper paint that allows you to customize car or truck brake calipers, drums and springs. Caliper Paint is formulated to resist brake dust and high temperatures that can be produced from harsh braking conditions.
This kit will do a full set of 4 brake calipers or drums.
This Kit Includes: x1 1 pint RED Coating, x1 Catalyst, 1x 1 pint mixing cup, x1 Chip Brush
Poppy's Caliper Coat is a durable caliper paint that allows you to customize car or truck brake calipers, drums and springs. Caliper Paint is formulated to resist brake dust and high temperatures that can be produced from harsh braking conditions.
This kit will do a full set of 4 brake calipers or drums.
This Kit Includes: x1 1 pint RED Coating, x1 Catalyst, 1x 1 pint mixing cup, x1 Chip Brush
Poppy's Caliper Coat is a durable caliper paint that allows you to customize car or truck brake calipers, drums and springs. Caliper Paint is formulated to resist brake dust and high temperatures that can be produced from harsh braking conditions.
This kit will do a full set of 4 brake calipers or drums.
This Kit Includes: x1 1 pint RED Coating, x1 Catalyst, 1x 1 pint mixing cup, x1 Chip Brush
Caliper Coat
Application Instructions
● Stir can contents thoroughly before application.
● Apply paint to the caliper or drum in thin, even strokes using the enclosed brush to cover
the entire surface.
● For the best appearance, apply 2-3 coats waiting 5 minutes between coats.
● Recoat after 24 hours if needed.
● DRY & RECOAT Dry and recoat times are based on 70oF and 50% relative humidity.
Allow more time at cooler temperatures. Dries to touch in 2-4 hours, to handle in 5-9
hours and is fully dry after 24 hours Wait 5-9 hours before reinstalling wheels and 24
hours before resuming use of the vehicle.
● CLEAN-UP Clean up wet paint with xylene
PAINTING APPLICATION .
PAINTING CONDITIONS
Use outdoors or in a well ventilated area such as an open garage. Apply when temperature is between 50-90oF (10-32oC) and humidity is below 85% to ensure proper drying.
SURFACE PREPARATION
Clean the brake calipers with proper brake cleaning solvents and follow all directions accordingly. Brake dust may contain asbestos.
Remove all loose brake dust with a HEPA type vacuum and wear NIOSH approved respiratory protection. Mask off the surrounding area prior to painting.
Cover the brake bleeder screws, brake lines and caliper piston boots with the enclosed masking tape. NOTE: Do not use compressed air to clean calipers as it could increase your risk to air-borne asbestos.
PRODUCT APPLICATION (cont.) .
WARNING: If you scrape, sand, or remove old paint, you may release lead dust.
LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO
AVOID EXPOSURE.
Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop.
Before you start, find out how to protect yourself and your family
